How to Care for Your Septic System – Guide for Beginners

Septic tanks

Septic tanks are quite important for any household because a faulty septic system can cause serious trouble. It is responsible for collecting the wastewater from your toilet, shower, kitchen, and any other kind of useless water. The irony is that despite the septic tanks are in use for a very long time, but still, a lot of homeowners don’t even know where the tank is even located. In addition, they don’t even know how to care for it.

A well-maintained septic tank can last up to 30 years, and for that, you might need someone for plumbing to sort out basic issues. You can use the following pointers to take care of your septic system.

Learn how the system works

Before you start taking care of the septic system, it is important to know how the system works and why it is even important for you. A common septic system has two main parts, the tank, and the drain field. The tank collects the wastewater and over a day the solid elements settle in the bottom and the greasy elements float on the surface.

Afterward, the water is pushed into the drain field and the sludge is left to the bacteria. After the septic tank installation, you must be able to detect a drop in performance with updated knowledge.

Don’t overload it

Overloading is one of the basic issues that a septic tank user might face. In a common household, one person consumes about 70 gallons of water per day. In case, you have a running toilet or a leaking issue somewhere in the pipes, then losing another 200 gallons is quite common.

Now a septic tanks that isn’t designed to bear that kind of additional load its efficiency would just drop. It is advised to deal with unwanted leaks before they become a headache to your septic system. The result of leaking will also be shown on your water bills as well, so be vigilant.

Get an efficient toilet

Conventional toilets consume huge amounts of water and according to a survey a person uses about 25 to 30 gallons every day. The reason for this huge consumption is the water reservoir in the toilet that consumes about 3 to 5 gallons per flush. However, if you want to keep your septic system from harm’s way, then installing a new toilet isn’t a bad option.

Because it uses about 1.6 gallons per flush, which is even less than 50 percent of the conventional toilet. So, if you want to increase the lifespan of your septic tanks system, then get a new and more efficient toilet.

Avoid disposing of garbage in it

The septic tank can’t digest inorganic waste that is why you must always keep it away from flushing it inside. Similarly, the food items, cat litter, toilet paper, shouldn’t be disposed of off in the septic tank because most of these items can’t be processed through the septic tank and must be trashed in the regular garbage.

If you mistakenly did, then it can choke the whole system instantly and the expense to clear it would be a lot more than you think. Being careful about the trash can greatly impact the health of your septic system. Some people use a hybrid system and it is considered safe to dispose-off certain kinds of waste. You either have to very precise or avoid doing it at all because a little negligence can affect the whole drain badly.

The significance of the septic system can’t be denied because of the nature of its usability. You must inform yourself well before the installation of the system, otherwise inappropriate use can lead to severe consequences.

In the worst-case scenario, the whole drain system would require a replacement and if you want to avoid such scenarios, then it is recommended to follow the guidelines closely and precisely. It might take you a while to adopt positive practices around your septic system, but then it would become a part of your routine.

Share to aware!

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on whatsapp

Leave a Reply

Your email address will not be published. Required fields are marked *

Read More